Search results for " Photodegradation"
showing 10 items of 13 documents
Synthesis of ZnO–Ag2CO3–Fe3O4@rGO core–shell structure: magnetically separable photocatalyst for degradation of MB using the Box–Behnken design
2020
In this work, a simple microwave method was utilized to prepare ZnO sheet linked with Fe3O4@rGO core–shell and of Ag2CO3 through formation of the quadri-photocatalytic with high activity. The microstructure, morphology, spectroscopic, and magnetic characteristics of the prepared samples were assessed using XRD, SEM, PL, TEM, FT-IR, DLS, and VSM analysis. The photocatalytic activity of the material was evaluated for photodegradation of methylene blue dye under the UV and visible light with home-made photoreactor. The response surface method in a Box–Behnken design was utilized to design the experiments. The parameters affecting the efficiency of the degradation including, pH (5–9), photocata…
Photocatalytic thin films of TiO2 formed by a sol-gel process using titanium tetraisopropoxide as the precursor
2008
Abstract Thin TiO 2 films were prepared with the dip-coating technique by using sols deriving from titanium tetraisopropoxide. TiO 2 films were formed on glass substrates previously covered by a SiO 2 layer obtained from a tetraethylortosilicate sol. The films, after a thermal treatment at 673 K, mainly consisted of TiO 2 anatase. The samples were characterised by X-ray diffraction, UV–Vis spectroscopy, scanning electron microscopy and atomic force microscopy. The photoactivity of the various films was tested by using as probe reaction the photo-oxidation of 2-propanol in gas-solid regime. The photoreactivity results indicated that the TiO 2 films were efficient for degrading 2-propanol und…
Neutral solar photo-Fenton degradation of 4-nitrophenol on iron-enriched hybrid montmorillonite-alginate beads (Fe-MABs)
2014
Hybrid montmorillonite-alginate beads (MABs) were prepared by the ion-gelation method from alginate and montmorillonite clay suspension dropped in a calcium chloride solution. Similarly, iron-enriched beads (Fe-MABs) were prepared using iron-exchanged montmorillonite. All beads were characterized by atomic absorption and Fourier-transform infrared spectroscopy. The efficiency of Fe-MABs as catalysts for the solar photo-Fenton performed at initial pH = 7.0 was evaluated by varying the catalyst amount and hydrogen peroxide concentration, and monitoring the removal of 4-nitrophenol (4-NP) at initial concentration of 10 ppm. A kinetic analysis showed that the removal of 4-NP by Fe-MABs followed…
Paper Functionalized with Nanostructured TiO2/AgBr: Photocatalytic Degradation of 2–Propanol under Solar Light Irradiation and Antibacterial Activity
2020
A facile method to produce paper&ndash
One-pot synthesis of ZnO nanoparticles supported on halloysite nanotubes for catalytic applications
2020
Abstract A versatile catalyst based on halloysite and zinc oxide (HNT@ZnO) was prepared, for the first time, starting from ZnO commercial bulk form as Zn precursor source, in a one-pot procedure. This strategy gives the possibility to obtain small ZnO nanoparticles loaded on the HNT surface without the use of inorganic salts which envisage the removal of undesired anions and therefore a calcination process at high temperature. It was found that the presence of halloysite improved the UV–vis spectral absorption ability of ZnO. The hybrid was successful used as photocatalyst for the methylorange and rhodamine B degradation. In addition, after eight consecutive cycles for the methylorange phot…
Highly robust and selective system for water pollutants removal: How to transform a traditional photocatalyst into a highly robust and selective syst…
2019
Highly porous monolithic aerogels based on ZnO photocatalyst and syndiotactic polystyrene (s-PS) were obtained by supercritical CO2 treatment of ZnO/s-PS gels. The prepared aerogels were characterized and their photocatalytic activity was evaluated using phenol and toluene as water pollutant models. The s-PS nanoporous crystalline phase, able to absorb pollutant molecules, was proven to be necessary to ensure high photocatalytic efficiency as the aerogel acts not only as a support, but also as pollutant pre-concentrator. The reusability of ZnO/s-PS aerogels is also strong showing no decrease in photocatalytic activity after six consecutive degradation trials. Finally, the aerogel matrix pre…
Magnetic hybrid nanomaterials for the photodegradation of microcontaminats in aqueous environment
2018
Bio-based substances (BBS) isolated from urban biowaste have been employed to prepare hybrid magnetic nanomaterials with iron oxides. Such materials have been tested, in the presence of hydrogen peroxide, for the light induced photodegradation of four microcontaminants (MCs) in aqueous environment: Carbamazepine (C, an anticonvulsant and analgesic drug), Flumequine (F, an antibiotic), Ibuprofen (I, a non-steroidal anti-inflammatory drug), and Sulfamethoxazole (S, an antibiotic). Preliminary photodegradation experiments were carried out at lab-scale in a solar simulator, whereas optimized experiments were carried out in a pilot plant under natural solar radiation. The MCs complete abatement …
Photodegradation of pharmaceutical drugs in aqueous TiO2 suspensions: mechanism and kinetics
2007
WOS: 000251165800003
Photodegradation of lincomycin in aqueous solution
2006
Aqueous solutions of lincomycin were irradiated with UV light in homogeneous and heterogeneous systems. Lincomycin disappeared in both systems but the presence ofTiO2noticeably accelerated the degradation of the antibiotic in comparison with direct photolysis. The rate of decomposition was dependent on the concentration of lincomycin and followed a pseudo-first-order kinetics. Photolysis involved only the oxidation of lincomycin without mineralization. Differently, the treatment withTiO2and UV light resulted in a complete mineralization of the antibiotic. The degradation pathways involved S- and N-demethylation and propyldealkylation. The mineralization of the molecule led to the formation …
Control of end-of-life oxygen-containing groups accumulation in biopolyesters through introduction of crosslinked polysaccharide particles
2021
The formulation of bio-based materials with good performance in service and controlled end-of-life is imperative for an effective circular economy. In this work, an innovative approach to induce and control the end-of-life of biodegradable polyesters through introduction of crosslinked polysaccharide particles is proposed. Chitosan (Ch) has been subjected to ionotropically crosslinking and then added to polylactic acid (PLA) at different amounts (1.0–4.0%w) by melt mixing. All obtained results suggest that the addition of crosslinked Ch (cCh) particles does not modify significantly the investigated biopolyester properties. Specifically, the thermal analysis of the composites reveals that th…